Certified Abatement Services in Las Vegas We create it.
Ensuring safety, compliance, and environmental protection with expert hazardous material removal. We protect your property and your health.
Our asbestos Expertise
Comprehensive property recovery services for any scale of disaster.
Fire Damage
Comprehensive smoke, soot, and odor removal to restore your property to pre-loss condition.
Soot Cleanup
Smoke Odor Removal
Content Cleaning
General Restoration
Complete structural repairs and property recovery for storm, wind, or accidental damage.
Roof Repair
Structural Reinforcement
Debris Removal
Safety Isn’t Just a Policy. It’s Our Standard.
ARC Las Vegas is committed to the highest levels of safety and regulatory compliance. We operate under strict state and federal mandates to protect our clients and the environment.
OSHA Compliance
Strict adherence to all occupational safety standards.
Certified Specialists
Team members are expertly trained in hazardous waste removal.
Licensed & Insured
Fully licensed for hazardous material handling in Nevada.
Emergency Response
Rapid deployment for urgent environmental hazards.
Our asbestos Process
1Initial Testing
Detailed site sampling and laboratory analysis to identify hazards.
2Containment
Establishing critical barriers and negative air pressure systems.
3Safe Removal
Controlled removal using specialized PPE and disposal protocols.
4Final Clearance
Post-abatement air monitoring and independent certification.
Frequently Asked Questions
Understanding the risks and regulatory requirements of abatement.
What is asbestos?
When is asbestos a hazard?
Asbestos is not always an immediate hazard. In fact, if asbestos can be maintained in good condition, it is recommended that it be left alone and periodic surveillance performed to monitor it’s condition. It’s only when asbestos containing materials are disturbed or the materials become damaged that it becomes a hazard. When the materials become damaged, the fibers separate and may then become airborne. In the asbestos industry, the term ‘friable’ is used to describe asbestos that can be reduced to dust by hand pressure. ‘Non-friable’ means asbestos that is too hard to be reduce to dust by hand. Non-friable materials, such as transite siding and floor tiles are not regulated by the State provided it does not become friable. Machine grinding, sanding and dry-buffing are ways of causing non-friable materials to become friable.
Why is asbestos a hazard?
Asbestos is made up of microscopic bundles of fibers that may become airborne when disturbed. These fibers get into the air and may become inhaled into the lungs, where they may cause significant health problems. Researchers still have not determined a “safe level” of exposure but we know the greater and the longer the exposure, the greater the risk of contracting an asbestos related disease.
Inhalation of asbestos fibers has been linked to serious diseases such as asbestosis, lung cancer, and mesothelioma. So, now that you have a better understanding of what asbestos is, it’s time to find out what materials potentially contain asbestos.
What building materials contain asbestos?
Asbestos has not been banned completely in building materials, so no firm build-date can be established to let you know your home is safe. Here is a short list of some of the more common building materials that could contain asbestos:
- Gaskets in old appliances
- Transite in siding, roofing, drainpipes, HVAC piping and gutters
- Fireproofing in old fireplaces
- Insulation that is loose-fill, block insulation sheets or spray-on
- Roofing materials in older homes
- Floor tiles and vinyl flooring that dates in the 1970’s
- Boiler or tank insulation
- Cladding sheets that haven’t been replaced in the last 50 years
- Caulking or construction mastic
- Adhesives and cement used in construction
How can I know what materials in my home contain asbestos?
Only a trained professional will be able to tell you for sure. Call ARC Services for help!
When do I need a professional?
There is no law that says asbestos has to be removed. It is only when the material can no longer be maintained in good condition and /or the airborne concentrations of asbestos are measured to be too high, or when the building is to be demolished or renovated, that removal may become the only option.
When applying for a remodeling, repair, or demolition permit, knowing the laws about asbestos abatement is important. ARC Services has the experience and knowledge to help. Read on to learn more.
When is it required to have a building inspection or survey?
There are new Federal Regulations that require all material that has not been tested to be presumed to contain asbestos. Only inspection and sampling may rebut the required presumption.
Any building owner who is renovating or demolishing a building is required by Federal law to have their buildings surveyed for asbestos containing materials. Buildings are not permitted to be demolished if there is friable asbestos present
How is asbestos removed?
When removal is conducted, a licensed Contractor must notify the Department of Air Quality and the Nevada Division of Industrial Relations ten days in advance of removal . Some projects, those involving removal of more than 160 square feet or 260 linear feet of ACM, are required to have a scope that details how the contractor will perform the removal.
Where does asbestos go after it is removed?
Asbestos is double bagged, utilizing wet methods, labeled, and provided a manifest for disposal to an appropriate landfill.
How can I tell if I have asbestos in my Building?
The only way to tell if a building material contains asbestos is to contact a certified indoor air quality hygienist who can take bulk samples. These samples are taken back to a lab, where they are analyzed under the microscope to determine the content. New OSHA regulations require building owners to presume that any suspect material is asbestos until a laboratory analysis is conducted. Any material that contains less than one percent asbestos is considered non-regulated.
